|
|
|
| Press
Releases |
|
New Technology – Optolock POF media converter for Ethernet |
Taipei Taiwan – Jan. 24, 2008
COMOSS today announces a new product - Optolock POF media converter. Through this product is produced, we are glad to have a new technology to guarantee our POF transceivers. Optolock is a new POF connection technology, with Optolock people can connect the bare POF cable onto Transceiver, no connector is required. Comoss also developed whole Optolock DIY kit. Including POF patch cord, media converter and POF cutter. Please contact COMOSS for detail information.
COMOSS Optical Products
OptoLock® is a registered trademark of Firecomms. |
 |
Media Contact:
Steven Lai
International Marketing Manager
COMOSS Electronic Co., Ltd.
Tel: +886 2 2688 2498
Fax: +886 2 2689 9160
E-Mail: Sales@comoss.com.tw |
|
New Technology –Optolock (SMI) POF Switch Hub for Ethernet |
Taipei Taiwan – Jan. 14, 2008
COMOSS today announces a new demo product – Optolock (SMI) POF Switch Hub. An Ethernet Switch Hub composed of RJ45 and Optolock (or SMI). Through this product launched, we have our POF product line more completely. Now, COMOSS can provide customers a total solution of POF Ethernet environment. A POF Switch Hub, media converter (convert Ethernet into POF) and POF patch cord composed of fiber network. A high-bandwidth, low radiation, easy set up FTTX solution. The data sheet of demo product is as follows.
COMOSS Optical Products
< POF Switch Hub data sheet_Draft>
<
Optolock POF transceiver module for Ethernet Performance Report>
Media Contact:
Steven Lai
International Marketing Manager
COMOSS Electronic Co., Ltd.
Tel: +886 2 2688 2498
Fax: +886 2 2689 9160
E-Mail: Sales@comoss.com.tw |
|
1394b Beta and Bilingual cable with Die Cast and jack screws type |
Taipei Taiwan – DEC. 19, 2007
COMOSS today announces the introduction of 1394b Beta and Bilingual cable with Die Cast and jack screws type. Die Cast & jack screws type provides better EMI solution and robustness connection. These assemblies may deliver data up to S 800 in a length up to 10 meters. Using in various 1394 systems for home and industrial application. Please contact sales people for more detail information.
Media Contact:
Steven Lai
International Marketing Manager
COMOSS Electronic Co., Ltd.
Tel: +886 2 2688 2498
Fax: +886 2 2689 9160
E-Mail: Sales@comoss.com.tw |
|
| |
|
New Technology – SMI POF media converter for Ethernet |
Taipei Taiwan – SEP. 29, 2007
COMOSS today announces a new demo product - SMI POF media converter. Through this product is produced, we are glad to have a new technology to guarantee our POF transceivers. Now, COMOSS can provide customers new requests in Ethernet Layer 2 testing. For examples, we can measure the throughput, latency, package loss, back-to-back and etc. COMOSS has had already a complete environment in Ethernet Layer 1 and Layer 2 testing. The data sheet of demo product is as follows.COMOSS Optical Products
< Data Sheet of SMI POF media converter >
COMOSS is ready to help end-users to build up home multimedia network!
Media Contact:
Steven Lai
International Marketing Manager
COMOSS Electronic Co., Ltd.
Tel: +886 2 2688 2498
Fax: +886 2 2689 9160
E-Mail: Sales@comoss.com.tw
|
| HDMI Association Approved Connector List
|
Taipei Taiwan – Sep. 26 , 2007
Comoss today announces that COMOSS whole series HDMI connectors are listed on HDMI association approved connector list. Please refer below link for detail information http://www.hdmi.org/manufacturer/approved_connectors.aspx#A-C
Report : HDMI CTRF Test Report
|
| 1394 Trade Association 4 th Quarterly Meeting |
Taipei Taiwan – Sep. 26 , 2007
Comoss today announces that Comoss will co-sponsor 1394 TA 4 th Quarterly Meeting in Landis Hotel Taipei, Taiwan from November 13 th to 16 th 2007. Please refer below link for detail information http://www.1394ta.org/Events/QuarterlyMeetings/q42007.htm
1394a and 1394b Compliance and Interoperability Workshop
The 1394 Trade Association will host a Compliance and Interoperability Workshop in Taipei , Taiwan starting on November 12, 2007. All companies are invited to participate. You do not need to be a me mber of the 1394TA. There is no charge for this event. All products which pass will be eligible for the FireWire/i.LINK 1394 compliant logos. Please register on line and refer below link for detail information
http://www.1394ta.org/Events/candiworkshops/Q42007_CandIWorkshop.htm
|
| IEEE-139b 2-port repeater & IEEE-139b 3-port repeater |
| Taipei Taiwan - July 17 , 2007
Today COMOSS has launched IEEE-139b 2-port repeater (1394REP-B2000) and IEEE-139b 3-port repeater (1394REP-B3000) to successfully extend the signal from 4.5 meters (standard) to 9 meters. Moreover, like all IEEE 1394 compliant hardware, 1394REP-B2000 and 1394REP-B3000 are easy to be set up and there is no configuration needed. In addition, they support not only “plug and play” function well but also serial bus data transmission rate of 100/ 200/400/ 800 Mbps. Meanwhile, both asynchronous and isochronous data transfers are also supported. As for supported devices, there are CD ROM, DVD, MO drives, PC Camera, Digital still Camera, DV camcorder, DV recorder, High speed HDD, Digital TV, Scanners, Printers and Set top box, etc. Let’s review the technical spec now!
Technical Specification:
1. Built-in PHY: TI. TSB81BA3
2. 1394 Bus Transfer rate: 100/ 200/400/ 800 Mbps
3. Fully supports provisions of IEEE P1394b Revision 1.33+at 1-Gigabit Signaling Rates
4. Fully supports provisions of IEEE 1394a .2000 and IEEE-1394 -1995 standard for high performance serial bus.
5. Fully compliant with FireWire, iLINK and SB1394 , Implementation of IEEE Std 1394
6. Device Interface: Provide 2 or 3 fully backward compatible,
( 1394a .2000 Fully Compliant) bilingual P1394b cable ports at up to 800 Megabits per second.(Mbits/S)
7.
Power Input Range: DC 8V-33V, max. 1.35A
Application:
• Cable extension
• Compatibility: allows to convert 1394-1995 & 1394a to 1394b
For more details, please link to the data sheet below:
1394REP-B3XXX data sheet V1.0
1394REP-B2XXX data sheet V1.0
Media Contact:
Steven Lai
International Marketing Manager
COMOSS Electronic Co., Ltd.
Tel: +886 2 2688 2498
Fax: +886 2 2689 9160
E-Mail: Sales@comoss.com.tw
|
|
Optolock POF Transceiver Module for Ethernet
|
|
Taipei Taiwan -
June 5
, 2007
COMOSS today announces that COMOSS OLKDX, an OptoLock POF Transceiver Module, which helps to convert digital to optical / optical to digital in a simple and cost-effective way. In order to make end users to set up Ethernet Media Converter on site easily by DIY method, this low-cost but high-speed OptoLock is integrated in a bare POF termination solution by using COMOSS hand cutter. It is needless to say that even a new end user can finish slice-and-plug installation on the spot immediately. With the invention of COMOSS hand cutter, OptoLock will be used often to facilitate the connection of devices in home network, car models, and consumer electronic products. In addition, COMOSS OLKDX can be used in Fast Ethernet Hub ports directly as it is fully compatible with IEEE 802.3u Fast Ethernet data communications standard. Its RCLED (Resonant Cavity Light Emitting Diode) at 660+/- 10nm peak wavelength offers a Fast Ethernet communication link over POF.
Features:
• Cheaper, quicker and easier termination solution
• Data rate: Meet IEEE 802.3u Fast Ethernet data communications standard.
• Peak wavelength: 660+/- 10nm
• Spectral width: 25nm
• Operating temperature: -40 ~ 70 ºC
• Transmission length: 100 meters at 100Mbps @ NA=0.3 POF
• I ntegrated optical lens
• Built-in LVDS and CML compatible IC for TX and RX
• Built-in Wake-on-LAN specification
• Low power consumption
• Reinforced Polymer package
• RoHS compliant
Data sheet // Optolock Drawing //
Specification //
Performance Report
COMOSS HAND CUTTER:
Figure 1. Cut bare POF cable cleanly by COMOSS hand cutter.
Figure 2. Separate the POF cords & insert one cord into each of two holes in the OptoLock.
Media Contact:
Steven Lai
International Marketing Manager
COMOSS Electronic Co., Ltd.
Tel: +886 2 2688 2498
Fax: +886 2 2689 9160
E-Mail: Sales@comoss.com.tw
|
|
HDMI V 1.3a |
| Taipei
Taiwan - May 2, 2007
We are glad to release a piece of surprising news today as our COMOSS HDMI series are complied with not only version 1.2 of the HDMI specification, but also version 1.3a of the HDMI specification from now on. With the release of version 1.3a of the HDMI specification in June 2006, higher display resolution formats were then added such as 1080P, deep color technology, audio/video synching capabilities, etc. Therefore, the bandwidth was increased up to 10.2 Gbps at 340 MHz. In November 2006, HDMI org. released version 1.3a. of the HDMI specification.An updated Compliance Test Specification (CTS V1.3a) document which includes new tests for the capabilities was defined in HDMI V1.3a.
In fact, HDMI 1.3a specifications cover two categories. CAT1 is the same specifications for Comoss HDMI Cables that have already been tested and approved. Regarding CAT2, it supports a higher bandwidth along the cable and a clock frequency of up to 340 MHz. Our
test report here is based on CAT2 HDMI cable & A type connector. It covers the cable assembly test of HDMI specification V1.3a and HDMI Compliance Test Specification V1.3a.
(CTS V1.3a.)
Unlike some companies may still stay in the satge of HDMI V1.2, Comoss has offered HDMI V1.3a to connect your digital life! We are ready to help end-users to build up home multimedia network! Come to take a look at our products as below:
Detailed Product Description:
• HDMI to HDMI cables • Cable color: black • Plug: gold plated • Version: 1.3 • RoHS compliance • Jacket: PVC • For high-definition video (720p and 1080i) or standard video formats and also for PS3 rated 1080p • Construction: injection • With protection mesh covered the whole cable
Application:
Supports high-definition video
• Plus multi-channel digital audio on a single cable
• Provides a digital audio and video interface between any source, such as aset-top box,DVD player, AV receiver and a digital television (DTV) 
Media Contact:
Steven Lai
International Marketing Manager
COMOSS Electronic Co., Ltd.
Tel: +886 2 2688 2498
Fax: +886 2 2689 9160
E-Mail: Sales@comoss.com.tw
|
|
In
CES07' Comoss is going to demonstrate all series of
POF & electrical connectivity solutions!
|
Taipei
Taiwan - December 27th, 2006 -
One
of the demonstration is with the linkage of Buffalo's
NAS (Network Attached Storage) and Note book,Along
with above POF & electrical connectivity, the leading
role of our show can be SMI (Small Media Interface),which
deliver POF signals to build up home network. The transmitting
performance is going up to 100Mbpsat 50M long and we’ll
set up an active network transmitting audio / video at
the same time without frame loss!
The other demonstration is with the linkage of 1394 Sony
DV camera and Note book, perfectly extend the transmitting
distance up to 50M. With isochronous characteristic of
1394 standard, we can see real-time video stream without
any frame loss played on the monitor. This firewire solution
also allows end-users can access any CE devices such as
iPod, DVD player or STB connected to 1394 Ethernet. And
the dream of making the automotive as a multimedia moving
center would easily to become truth.
Visitors can see these demonstrations at Comoss booth
at the same time. And all of the demonstrating components
: such as SMI & IDB POF connectors, SMI & IDB
POF transceivers, POF patch cords, and converters are
allproduced inside the Comoss.
|
|
The
future trend : Ultra-thin round, and non-PVC based flat, HDMI cable
assemblies
|
Taipei
Taiwan - December 21st, 2006 - COMOSS
today is pleased to release some new HDMI cable assemblies.Coming
with the hottest I/O connection solution for HDMI
(High Definition Multimedia Iterface), the new released
products are just meet "the resources saving
and green environment protection" design concept
for the future world.
COMOSS
is now ready to help end-users to build up home multimedia
network!
Features
A.
Ultra-thin round HDMI cable assemblies :
When resources are over used, this products can reduce
the
material utilization tremendously. It designed for
resources saving.
Thiner wire gauge, #34AWG, for up to 3 meters long.
B. Non-PVC based flat  HDMI
cable assemblies
This is to replace Halogenated Flame Retardants in
Wire and Cable
coatings. To avoid the risk of environmental contamination
from emissions
given off during product manufacturing or disposal.
Strictly meet RoHS requirements, no releasing toxins
such as dioxine
when burned.
C. Above products are :
1. Produced by internal developped automatic soldering
machine.
--- high process capability.
2. Complied with HDMI specification v1.2
3. Meet HDMI compliance test specification v1.1
4. Bandwidth : 5Gbps
5. User friendly for LCD TV, LCD Projector, Plasma
TV, Rear-Projection
TV, HDTV, Set-Top Box & DVD player --- etc.
Media
Contact:
Steven Lai
International Marketing Manager
COMOSS Electronic Co., Ltd.
Tel: +886 2 2688 2498
Fax: +886 2 2689 9160
E-Mail: Sales@comoss.com.tw
|
|
|
Taipei Taiwan - October 29th, 2006 - COMOSS
today is pleased to present our new generation
FOT to the public market. In 2006 we'd completed
the research and design, now we're ready to
hit the market with our innovative ideas: The IDB-1394 POF transceiver is designed to amplifyand extend the signal carrying by POF (Plastic Fiber Optic) patch cord. Within the embedded vehicle network, our IDB-1394 transceiver makes the data transferring at S200(250Mbps) for 50 meters long . By this advantage, it will be simple and easy to build the in-car LAN(Local Area Network) media center,
| |
1394/Firewire
Digital Type FOT
Meets
the IEEE 1394b S200 (250 Mbps) specification
• Integrated
CMOS driver IC
• Resonant
Cavity LED at red 650 nm with small emission aperture
suitable for
Plastic Optical Fiber (POF)
• Configured
for IEEE 1394b with LVDS I/O
• High
sensitivity receiver IC and pin-diode for one-step light
to digital conversion
• Compatible
with SMI and IDB-1394 automotive connector form factors
• Integrated
optics to efficiently focus and direct light
• Ultra-low
power consumption
For
order example: SMIDX-BBDGX (Gray)
Fast
Ethernet FOT
• Compatible
with IEEE 802.3u Fast Ethernet data communications standard
• Designed
for CML (Current-Mode Logic) differential voltage swing
levels
• Integrated
CMOS driver IC
• Resonant
Cavity LED at red 650 nm with small emission aperture
suitable for
Plastic Optical Fiber (POF)
• High
sensitivity receiver IC and pin-diode for one-step light
to digital conversion
• Integrated
optics to efficiently focus and direct light
• Low
power consumption
• 100
Mbps over 50m of POF
For
order example: SMIDX-BBEBX (Black)
Media
Contact:
Steven Lai
International Marketing Manager
COMOSS Electronic Co., Ltd.
Tel: +886 2 2688 2498
Fax: +886 2 2689 9160
E-Mail: Sales@comoss.com.tw
|
|
|
Leading
the Optical Trend - SMI Ethernet Media Converter
|
<Data Sheet>
Taipei
Taiwan - October 23th, 2006 - COMOSS today
proudly launch another new Electrical to Optical Converter.
Different from the former products, the new ethernet
converter can attain IEEE802.3u fast ethernet communication
standard. The max length SMI (Small Media Interface)
patch cord can deliver signal is up to 50 meters.COMOSS
is now ready to help end-users to build up home multimedia
network!
Features
1.Compatible
with IEEE802.3u Fast Ethernet standard.
2.
CML (Current-Mode-Logic) differential voltage swing
levels.
3.
Intergrated CMOS driver IC
4.
Ultra-low power consumption
5.
100Mbps over 50m of POF
Media
Contact:
Steven Lai
International Marketing Manager
COMOSS Electronic Co., Ltd.
Tel: +886 2 2688 2498
Fax: +886 2 2689 9160
E-Mail: Sales@comoss.com.tw
|
|
|
Being a member of HDMI.org since 2000, COMOSS has completed the development of HDMI-related connectors and cable assemblies, which allow 5Gbps full date rate transmitting for 10 meters long by standard STP cooper cables.
Further to our existing products, we now proudly announce our new HDMI/DVI Extension Cable Series , using cooper cable as the physical transmitting media. The digital A/V signals can easily extend up to 50 meters! Based on the design and measuring capability of high frequency products, COMOSS successfully overcomes the attenuation and crosstalk problem. Meanwhile, the data loss rate can be controlled to maintain at the minimum level.
With this creative concept, customers can easily share their digital experience to anywhere. Just press the play button of DVD player in the living room, and all your families will enjoy high definition 1080p video & 5.1 surround audio in separated rooms. No more wiring complexity you would be annoyed but use COMOSS HDMI/DVI Extension Cable to simply all your decorating work!
Features:
• Fully Compatible with DVI Spec 1.0 / HDMI Spec 1.2
• Transmitting Length: Up to 50M at TMDS Signal
• Video Compatibility: VGA, SVGA, XGA, SXGA, and UXGA
• DTV Compatibility: 480i, 480p, 720p, 1080i and 1080p
• Operating Temperature: 0ºC ~ 70 ºC
• Low Power Consumption: 0.5A DC max
COMOSS offers HDMI/DVI total solution to connect your digital life!
 
|
|
COMOSS
Provides New Generation Multimedia Interface–SMI
|
Taipei , Taiwan – July 5th, 2005 - COMOSS today releases a series of SMI-related products: 1394B to SMI OE converter , SMI Transceiver , SMI Connector (Plug) and SMI Patch Cord . Not only COMOSS manufactures single components for professional purpose, but also construct a complete solution for setting up home network. “ We've foreseen tremendous market demands for home network, thus we develop and promote SMI as the perfect solution which interconnects devices such as HDTV, Set-up Box, DVD-Recorder, and PC” said by Steven Lai, International Marketing Manager of COMOSS Electronic Co., Ltd.
SMI (Small Multimedia Interface), is a whole new connection technology, carrying signals meet IEEE1394 standards. The physical transferring media is chosen as POF (Plastic Optical Fiber), for consideration of low-cost and short distance transferring (50M). With the reliable mechanism structure, end-users can push or pull SMI Patch Cord easily, and have no risk of damaging SMI Transceiver itself. Every aspect shows the unique design of SMI interface and it would be no doubt becoming the mainstream in near future.COMOSS invites you to enjoy the future convenience! Features:
1. Data Rate: S200 (250Mbps)
2. Transmitting Distance: 50 Meters by POF
3. Small Form Factor Design: 1/2 volume of PN connector
4. User Friendly: SMI Plug/Socket with positive latching system
5. Fully Compatible for IEEE1394 Standard
6. No Electromagnetic Interference (EMI)
Media Contact:
Steven Lai
International Marketing Manager
COMOSS Electronic Co., Ltd.
Tel: +886 2 2688 2498
Fax: +886 2 2689 9160
E-Mail: Sales@comoss.com.tw |
 |
 |
 |
 |
|
|
|
|
|
|
|
Taipei,
Taiwan - May 17th, 2005 - Today COMOSS is
proud to announce our 5 meter HDMI cable assembly
has passed ATC's complaince test, examined by Matsushita
Industry Co., Ltd.(HDMI
ATC Certification)
|
|
Taipei,
Taiwan – March 24,2005 -
COMOSS today introduces the total solution for
long distance 1394 Firewire transmitting. With
the outstanding R&D capability, we’ve
successfully integrated POF patch cord, IDB1394
to POF Convertor, and IEEE 1394b cable ass’y
into one solution, providing reliable data quality
in setting up home network or embedded car network.
In
CeBIT 2005, we demonstrated this innovative
idea with the linkage of 1394 Sony DV camera
and Notebook, perfectly extend the transmitting
distance up to 50M. With isochronous characteristic
of 1394 standard, we can see real-time video
stream without any frame loss played on the
monitor. Furthermore, end-users can access any
CE devices such as iPod, DVD player or STB connected
to 1394 Ethernet. It means that you can broadcast
your digital experience to all the nodes. No
more limitation of 4.5M length can be concerned
once you adopt our long-distance Firewire solution!COMOSS
brings a convenient solution for long distance
Firewire transmitting!
Features:
--
Data Rate: S200 (250Mbps)
-- Transmitting Distance: 50M by POF patch cord
-- Low Power Consumption
-- Low Electromagnetic Interference
--
No Data Crosstalk
-- Fail-Safe Circuitry Design
--
Fully backward compatible to 1394-1995 and 1394a-2000
|
|
|
INTERFACE CONVERTER FOR ALL 1394-RELATED
PRODUCTS
|
|
|
|
March
1, 2005
- COMOSS is in the position to strike the
market with innovative IDB-1394 products.
As a member of 1394TA.org since 1999, COMOSS
has accumulated enough Know-How to be a
reliable manufacturer. Now we are confident
and pleased to introduce our Shielded IDB-1394
POF Transceiver
(Comoss IDBDX series) and
Evaluation Board to you. |
|
The IDB-1394 POF transceiver is designed to
amplifyand
extend the signal carrying by POF (Plastic
Fiber Optic) patch cord. Within the embedded
vehicle network, our IDB-1394 transceiver
makes the data transferring at S200(250Mbps)
for 50 meters long . By this advantage,
it will be simple and easy to build the
in-car LAN(Local
Area Network) media center, widely applied to portable electronic devices such as DV-Cam,
Video/Audio Players, Notebook and device requires high-speed isochronous data
|
|
|
|
|
| Events |
OVC EXPO 2008
The 6th Opitcs Valley of China International Optoelectronic Exposition and Forum
Date:2008/4/25 - 2008/4/28
Booth No.:1175 & 1174
 |
OFCNFOEC 2008
Date: Feb. 26-28, 2008
Venue: San Diego Convention Center, San Diego, California US
Booth No.:3939
 |
1394TA Q4 Quarterly Meeting
Date:2007/11/13 - 2007/11/16
Venue: Landis Hotel Taipei, Taiwan
|
| 2004
Events 2006 Events |
| |
|
